Blocks
Shop By
-
40mm Carbo Twing BlockSKU: HK2699Single-hand operated snatchblock based on Harken's Carbo series with 40mm sheave. Can be used for 2:1 or 1:1 barber-haulers. Learn More€89.99 €89.99
-
40mm Zircon blockSKU: HK2190Use the Harken Zircon blocks for precision trimming. The blocks are very efficient that you can adjust the sail and sheet tension perfectly. Harken Zircon blocks are made for jib sheets, spinnaker sheets and mainsail sheets. Learn More€64.99 €64.99
-
40mm Zircon block with becketSKU: HK2191Use the Harken Zircon blocks for precision trimming. The blocks are very efficient that you can adjust the sail and sheet tension perfectly. Harken Zircon blocks are made for jib sheets, spinnaker sheets and mainsail sheets. Learn More€66.99 €66.99
-
57mm Zircon blockSKU: HK2195Use the Harken Zircon blocks for precision trimming. The blocks are very efficient that you can adjust the sail and sheet tension perfectly. Harken Zircon blocks are made for jib sheets, spinnaker sheets and mainsail sheets. Learn More€75.99 €75.99
-
57mm Zircon block with becketSKU: HK2196Use the Harken Zircon blocks for precision trimming. The blocks are very efficient that you can adjust the sail and sheet tension perfectly. Harken Zircon blocks are made for jib sheets, spinnaker sheets and mainsail sheets. Learn More€78.49 €78.49
-
57mm Carbo ratchet blockSKU: HK2135Harken 57 mm Carbo ratchet block. Great for sheeting systems and down hauls. Use line up to 10 mm and the block weighs 85 gram. Max. workload is 227 kg and breaking strength is 907 kg. Learn More€89.49 €89.49
-
57mm Carbo ratchamatic block 2x gripSKU: HK2168Power3 ratchet blocks provide sailors that race small one-designs with three holding-power options to handle a variety of wind and sea conditions. More choices allow sailors to fine-tune their set-ups in tandem with the purchase that provides the ideal level of power, responsiveness and grip.
Learn More€130.95 €130.95
-
57mm Carbo HTE ratchamatic block 2x gripSKU: HK2168HTEThe Carbo Ratchamatic® is a load-sensing ratchet block that rolls freely in both directions under low loads and automatically engages the ratchet as loads increase. Shifting between ratchet and light-air modes is seamless.
Learn More€131.95 €131.95
-
57mm Carbo ratchet block 2x gripSKU: HK2169Power3 ratchet blocks provide sailors that race small one-designs with three holding-power options to handle a variety of wind and sea conditions. More choices allow sailors to fine-tune their set-ups in tandem with the purchase that provides the ideal level of power, responsiveness and grip. Learn More€92.49 €92.49
-
57mm Carbo T2 ratchamatic block 2x gripSKU: HK2170Power3 ratchet blocks provide sailors that race small one-designs with three holding-power options to handle a variety of wind and sea conditions. More choices allow sailors to fine-tune their set-ups in tandem with the purchase that provides the ideal level of power, responsiveness and grip. Learn More€94.49 €94.49
-
75mm Carbo ratchet block 2x gripSKU: HK2176Power3 ratchet blocks provide sailors that race small one-designs with three holding-power options to handle a variety of wind and sea conditions. More choices allow sailors to fine-tune their set-ups in tandem with the purchase that provides the ideal level of power, responsiveness and grip.
Learn More€110.95 €110.95
-
75mm Carbo ratchamatic block 2x gripSKU: HK2177Power3 ratchet blocks provide sailors that race small one-designs with three holding-power options to handle a variety of wind and sea conditions. More choices allow sailors to fine-tune their set-ups in tandem with the purchase that provides the ideal level of power, responsiveness and grip.
The Carbo Ratchamatic® is a load-sensing ratchet block that rolls freely in both directions under low loads and automatically engages the ratchet as loads increase. Shifting between ratchet and light-air modes is seamless.
2x grip: breeze–on/puffs; 30:1 holding power Learn More€169.95 €169.95
-
57mm Carbo HTE ratchamatic blockSKU: HK2625HTEThe Carbo Ratchamatic® is a load-sensing ratchet block that rolls freely in both directions under low loads and automatically engages the ratchet as loads increase. Shifting between ratchet and light-air modes is seamless.
The spring on the HTE (high-threshold engage) version of the 57 mm Carbo Ratchamatic blocks was made stiffer to delay the point where the ratchet engages, allowing the block to run free more of the time. The ratchet function engages at higher loads to allow the old kite sheet to run free for crisper gybes.
Standard grip: medium/light air; 10:1 holding power. Learn More€125.95 €125.95
-
Element 45mm Block stand-upSKU: HK6250Stand-up blocks are an addition to our Element line. Use them for sheeting and halyard systems, running backstays, controls and other applications where you don’t want the block to hit the deck.
Learn More€135.95 €135.95
-
Element 45mm Block stand-up/becketSKU: HK6251Stand-up blocks are an addition to our Element line. Use them for sheeting and halyard systems, running backstays, controls and other applications where you don’t want the block to hit the deck.
Learn More€145.95 €145.95
-
29mm Carbo stand-up blockSKU: HK349The 29 mm Harken Carbo stand-up block can be used for lines up to 8mm. This block has a max working load of 150 kg, a breaking load of 454 kg and weighs just 31 grams. Learn More€27.50 €27.50
-
29mm Carbo blockSKU: HK340The 29 mm Harken Carbo block can be used for lines up to 8mm. This block has a max. working load of 150 kg, a breaking load of 454 kg and weighs just 26 grams. Learn More€30.50 €30.50
-
29mm Carbo block with becketSKU: HK341The 29 mm Harken Carbo block with becket can be used for lines up to 8mm. This block has a max. working load of 150 kg, a breaking load of 454 kg and weighs just 28 grams. Learn More€35.25 €35.25
-
29mm Carbo fixed blokSKU: HK348The 29 mm Harken Carbo fixed block can be used for lines up to 8mm. This block has a max working load of 150 kg, a breaking load of 454 kg and weighs just 23 grams. Learn More€17.55 €17.55
-
29mm Carbo cheek blockSKU: HK350The 29 mm Harken Carbo cheek block can be used for lines up to 8mm. This block has a max working load of 150 kg, a breaking load of 454 kg and weighs just 17 grams. Learn More€17.40 €17.40
