Blocks
-
40mm Carbo Twing BlockSKU: HK2699Single-hand operated snatchblock based on Harken's Carbo series with 40mm sheave. Can be used for 2:1 or 1:1 barber-haulers. Learn More
-
20mm Ball Bearing Block with SwivelSKU: SE40210109R
BALL BEARING BLOCKS
Ball bearing blocks are used where the loads are more moderate and dynamic. The ball bearings provide for good sheave rotation with the lowest possible friction. Available in 20, 30, 40 and 60 mm sheave diameters.
Learn More -
20mm Ball Bearing Cheek BlockSKU: SE40210113R
BALL BEARING BLOCKS
Ball bearing blocks are used where the loads are more moderate and dynamic. The ball bearings provide for good sheave rotation with the lowest possible friction. Available in 20, 30, 40 and 60 mm sheave diameters.
Learn More -
20mm Ball Bearing Stand-Up BlockSKU: SE40210114R
BALL BEARING BLOCKS
Ball bearing blocks are used where the loads are more moderate and dynamic. The ball bearings provide for good sheave rotation with the lowest possible friction. Available in 20, 30, 40 and 60 mm sheave diameters.
Learn More -
20mm Ball Bearing Stand-Up Double BlockSKU: SE40210115R
BALL BEARING BLOCKS
Ball bearing blocks are used where the loads are more moderate and dynamic. The ball bearings provide for good sheave rotation with the lowest possible friction. Available in 20, 30, 40 and 60 mm sheave diameters.
Learn More -
20mm Ball Bearing Lead BlockSKU: SE40210116R
BALL BEARING BLOCKS
Ball bearing blocks are used where the loads are more moderate and dynamic. The ball bearings provide for good sheave rotation with the lowest possible friction. Available in 20, 30, 40 and 60 mm sheave diameters.
Learn More -
20mm Ball Bearing Block Through DeckSKU: SE40210117R
BALL BEARING BLOCKS
Ball bearing blocks are used where the loads are more moderate and dynamic. The ball bearings provide for good sheave rotation with the lowest possible friction. Available in 20, 30, 40 and 60 mm sheave diameters.
Learn More -
20mm Ball Bearing Block with StrapSKU: SE40210101R
BALL BEARING BLOCKS
Ball bearing blocks are used where the loads are more moderate and dynamic. The ball bearings provide for good sheave rotation with the lowest possible friction. Available in 20, 30, 40 and 60 mm sheave diameters.
Learn More -
57mm Carbo ratchet blockSKU: HK2135Harken 57 mm Carbo ratchet block. Great for sheeting systems and down hauls. Use line up to 10 mm and the block weighs 85 gram. Max. workload is 227 kg and breaking strength is 907 kg. Learn More
-
57mm Carbo ratchamatic block 2x gripSKU: HK2168Power3 ratchet blocks provide sailors that race small one-designs with three holding-power options to handle a variety of wind and sea conditions. More choices allow sailors to fine-tune their set-ups in tandem with the purchase that provides the ideal level of power, responsiveness and grip.
Learn More -
57mm Carbo HTE ratchamatic block 2x gripSKU: HK2168HTEThe Carbo Ratchamatic® is a load-sensing ratchet block that rolls freely in both directions under low loads and automatically engages the ratchet as loads increase. Shifting between ratchet and light-air modes is seamless.
Learn More -
57mm Carbo ratchet block 2x gripSKU: HK2169Power3 ratchet blocks provide sailors that race small one-designs with three holding-power options to handle a variety of wind and sea conditions. More choices allow sailors to fine-tune their set-ups in tandem with the purchase that provides the ideal level of power, responsiveness and grip. Learn More
-
57mm Carbo T2 ratchamatic block 2x gripSKU: HK2170Power3 ratchet blocks provide sailors that race small one-designs with three holding-power options to handle a variety of wind and sea conditions. More choices allow sailors to fine-tune their set-ups in tandem with the purchase that provides the ideal level of power, responsiveness and grip. Learn More
-
75mm Carbo ratchet block 2x gripSKU: HK2176Power3 ratchet blocks provide sailors that race small one-designs with three holding-power options to handle a variety of wind and sea conditions. More choices allow sailors to fine-tune their set-ups in tandem with the purchase that provides the ideal level of power, responsiveness and grip.
Learn More -
75mm Carbo ratchamatic block 2x gripSKU: HK2177Power3 ratchet blocks provide sailors that race small one-designs with three holding-power options to handle a variety of wind and sea conditions. More choices allow sailors to fine-tune their set-ups in tandem with the purchase that provides the ideal level of power, responsiveness and grip.
The Carbo Ratchamatic® is a load-sensing ratchet block that rolls freely in both directions under low loads and automatically engages the ratchet as loads increase. Shifting between ratchet and light-air modes is seamless.
2x grip: breeze–on/puffs; 30:1 holding power Learn More -
57mm Carbo HTE ratchamatic blockSKU: HK2625HTEThe Carbo Ratchamatic® is a load-sensing ratchet block that rolls freely in both directions under low loads and automatically engages the ratchet as loads increase. Shifting between ratchet and light-air modes is seamless.
The spring on the HTE (high-threshold engage) version of the 57 mm Carbo Ratchamatic blocks was made stiffer to delay the point where the ratchet engages, allowing the block to run free more of the time. The ratchet function engages at higher loads to allow the old kite sheet to run free for crisper gybes.
Standard grip: medium/light air; 10:1 holding power. Learn More -
Kite Block 19mm Sheave (RETAIL PACK, 2 BLOCKS)SKU: RF13101Kite Block 19mm white sheave (2 pack) Learn More
-
S20 Single block for soft attachmentSKU: SE40210160RThe S20 single is a soft attachment block which offers low friction and low weight combined with a soft and flexible assembly. This block weights only 9 gram and is suitable for a line up to 6mm. This makes the block perfect for halyards, sheets and trimlines on dinghies and sportboats. Rope not included. Learn More
-
S20 Single block for soft attachment with lineSKU: SE40210162RThe S20 single is a soft attachment block which offers low friction and low weight combined with a soft and flexible assembly. Attach the block with the supplied ready-made spliced loop. This block weights only 45 gram and is suitable for a line up to 6mm. This makes the block perfect for halyards, sheets and trimlines on dinghies and sportboats. Learn More
-
S30 Single block for soft attachmentSKU: SE40310160RThe S30 single is a soft attachment block which offers low friction and low weight combined with a soft and flexible assembly. This block weights only 18 gram and is suitable for a line up to ø7mm. This makes the block perfect for halyards, sheets and trimlines on dinghies and sportboats. Rope not included. Learn More