Blocks
Shop By
-
50mm Protexit block Trough DeckSKU: HK1203When you race HARD, and you rip through as many hoists and douses as we do sailing W-L legs all the time, you should expect to start wearing through the sideplates of your halyard exit block right? Wrong! Learn More
-
Low Friction RingsSKU: PRH130Low Friction rings are simple aluminum rings which can be spliced into lines. They are used to deflect sheets and control lines or for lashings. They are made of high strength aluminum. Available in 6 different sizes. Learn More
-
30mm Protexit block Trough DeckSKU: HK1200When you race HARD, and you rip through as many hoists and douses as we do sailing W-L legs all the time, you should expect to start wearing through the sideplates of your halyard exit block right? Wrong! Learn More
-
30mm Protexit block Trough Deck doubleSKU: HK1201When you race HARD, and you rip through as many hoists and douses as we do sailing W-L legs all the time, you should expect to start wearing through the sideplates of your halyard exit block right? Wrong! Learn More
-
40mm Protexit block Trough DeckSKU: HK1202When you race HARD, and you rip through as many hoists and douses as we do sailing W-L legs all the time, you should expect to start wearing through the sideplates of your halyard exit block right? Wrong! Learn More
-
60mm Protexit block Trough DeckSKU: HK1204When you race HARD, and you rip through as many hoists and douses as we do sailing W-L legs all the time, you should expect to start wearing through the sideplates of your halyard exit block right? Wrong! Thanks to Harken Protexit™ blocks, wear from side angle loading is not inevitable. Protexit’s all-aluminum, wear-resistant housing carefully ushers line in and out no matter the angle. There’s more: Protexit blocks offer higher working loads than any small boat exit blocks we’ve ever made. Protexit aluminum sheaves rotate on sleeve bearings with Delrin® sideload balls so they don’t deform in extreme conditions, while reducing wear on the halyard, too.
Delrin is a registered trademark of E. I. du Pont de Nemours and Company or its affiliates. Learn More -
Lead RingSKU: HK32Harken® Lead Rings are simple, weight-saving devices used to route line for jib in-haulers, twings, barberhaulers, lazy jacks, cascading backstays and other applications requiring minimal fine-tune adjustments. Rings are Hard Lube-anodized 6061-T6 aluminum for a smooth, slippery surface, and with no moving parts, wear is minimal. Learn More
-
Series 55 Ball Bearing Orbit Block Single RF55101SKU: RF55101Easily fitted and securely retained Dyneema Link head. Learn More
-
Series 55 BB Orbit Block, Single, Becket, Swivel head RF55110SKU: RF55110Swivel shackle head for unlimited block rotation. Stainless steel shackle head and compatibility with sharp fixing points. Ultra low profile integrated becket. Learn More
-
Series 55 Ball Bearing Orbit Block Single, becket RF55111SKU: RF55111Easily fitted and securely retained Dyneema Link head
Ultra low profile becket Learn More -
Series 55 BB Orbit Block, Cheek RF55151SKU: RF55151Cheek block with recessed underside to suit cruved mounting surface Learn More
-
Series 55 BB Orbit Block, Upright Lead RF55171SKU: RF55171• Mainsheet systems on dinghies, sportsboats and small keelboats to 9m (30ft)
• Halyard, Vang and Backstay application on boats to 8m (26ft)
• Control line applications on larger yachts Learn More -
Series 55 Ball Bearing Orbit Block Double RF55201SKU: RF55201Easily fitted and securely retained Dyneema Link head. Single inner cheeks for minimum Weight & compactness Learn More
-
Series 55 Ball Bearing Orbit Block Triple RF55301SKU: RF55301Easily fitted and securely retained Dyneema® Link head. Single inner cheeks for minimum Weight & compactness Learn More
-
Series 55 Ball Bearing Orbit Block Fiddle* RF55501SKU: RF55501Becket fiddle blocks use a Dyneema® Link attachment for the sheet termination and are suitable for both spliced and un-spliced lines. If you need additional purchase, a becket take-off can be simply added to any fiddle block version just by adding a Dyneema® Link. Learn More
-
Series 55 Ball Bearing Orbit Block Fiddle, becket* RF55511SKU: RF55511Easily fitted and securely retained Dyneema Link head. LightWeight integrated becket link Learn More
-
Series 55 Ball Bearing Orbit Block Fiddle, adjustable cleat* RF55521SKU: RF55521Easily fitted and securely retained Dyneema Link head. Composite C-Cleat and fairlead Learn More
-
Series 55 Ball Bearing Orbit Block - Fiddle, becket, adjustable cleat RF55531SKU: RF55531Easily fitted and securely retained Dyneema Link head. Composite C-Cleat and fairlead Learn More
-
Series 55 RT Orbit Block, Single Swivel Head RF56100SKU: RF56100Swivel shackle head for unlimited block rotation. Stainless steel shackle head and compatibility with sharp fixing points. Automatic & manual ratchet block Learn More
-
Series 55 Ratchet Orbit Block Single, Auto & Manual RF56101SKU: RF56101Easily fitted and securely retained Dyneema® Link head. Automatic & manual ratchet block Learn More