Check out our sailing hardware of brands like Harken, Ronstan, Tylaska, Spinlock, Wichard and Selden. We sell the whole range of blocks, clutches, cleats, furling systems, fittings, deck organizers and winches you may need for your sailing boat. Did you not find the product you were looking for? Just contact us.
Dogbone, made from black anodized aluminium, to use as a fitting to close spliced loops. Tapered geometry to keep line centered. Extra hole to prevent the ropebone from going overboard. Learn More
Clamcleat® CL204 is an elegant design in black or white nylon. The rope drops down into the teeth. It can be fitted to all flat and curved surfaces, using rivets, countersunk (flathead) screws or bolts. CL204 can also be sewn, riveted or bolted onto webbing or fabric. Learn More
With the CL209 the rope drops down into the teeth to give a quick and positive lock that is easy to release. The cleat is manufactured from UV resistant plastic, making it cost effective and ideal for holding rope in an outdoor environment. Learn More
The Clamcleat® CL211 Mk2 is a neat, compact alloy cleat with many uses for sailing, kitesurfing, sports equipment and industrial applications. Manufactured from aluminium for light weight and durable performance. Ideal for halyards & control lines on dinghies & kayaks. Can also be used on sports nets. Learn More
Compact & ideal for reaching hooks. The side entry fairlead allows ropes to be hooked in for cleating, yet easily removed. This cleat is ideal for use on sports nets and sun sails. Learn More
Compact & ideal for reaching hooks. The side entry fairlead allows ropes to be hooked in for cleating, yet easily removed. Ideal for use on sports nets. Learn More
Clamcleat® CL222 is an elegant design in aluminium with a silver or hard anodised fiinish. The rope drops down into the teeth. It can be fitted to all flat and curved surfaces, using rivets, countersunk (flathead) screws or bolts. CL204 can also be sewn, riveted or bolted onto webbing or fabric. Learn More
The bottom roller of the Clamcleat® CL230 allows ropes to enter the cleat from below. Ideal for bringing a rope through a surface. Can also be rigged on a rope for 1:1 or 2:1 advantage. Learn More
A compact black nylon cleat with integral fairlead to guide the rope into the teeth from up to 90 degrees. Same hole centres as CL209 and CL254. Fix with bolts or screws. Learn More
The teeth in the CL255 are above the rope so that when un-cleated, the rope automatically drops away and can run freely. Making it ideal for through-deck or through-mast applications. Learn More
The Clamcleat® CL257 Auto-Release cleat provides the neatest and best solution to the problem of how to lock-down a rudder blade yet allow it to flip-up if it hits the bottom or a solid obstacle in the water. Learn More