Cleats & Stoppers
Cleats, jammers, clutches and stoppers of Spinlock, Harken, Clam Cleat, Ronstan. Filter your brand or model in our shopping options. If you can't find what you are looking for, please contact us.
-
Clamcleat Tapered Pad for CL203 & Mk1 JuniorsSKU: CL818The Clamcleat® CL818 Tapered Pad aids correct rope/cleating alignment. It can allow tensioning without rubbing the rope over the cleat teeth. Learn More
-
Clamcleat Tapered Pad for CL211 Mk2 & Mk2 Racing cleatsSKU: CL819The Clamcleat® CL819 Tapered Pad aids correct rope/cleating alignment. It can allow tensioning without rubbing the rope over the cleat teeth. Learn More
-
Clamcleat Side-Entry Port 2-5mm blackSKU: CL214Clamcleat® CL214 Leech Line Cleat is a low profile black nylon cleat, for sewing or riveting onto sails and technical fabrics. It can be mounted in two positions on the sail. Learn More
-
SUA Mini Jammer TripleSKU: SUA3Spinlock - Small halyard jammer for lines between 6-10 mm. Available in 3 different types. Learn More
-
Micro Cam Kit Carbo-Cam / Fast Release FairleadSKU: HK499Fast Release fairleads feature low-friction, angled stainless steel line guides on the exit side of the cleat. The angled lead keeps the line away from the cam to eliminate unexpected recleats during maneuvers. Learn More
-
Series 20 BB Block, Pivoting Lead, CleatSKU: RF20175Pivoting cleat unit. 20mm (3/4") sheave with stainless steel ball bearing, small C-Cleat & fairlead Learn More
-
Swivel Cam Base / 150 Cam-Matic (3 - 12 mmSKU: HK144You can use these cam swivel bases when leads must rotate to face the trimmer. Use them for mainsheets, Jib sheets and control lines. Learn More
-
Little Swivel Base / 150 Cam-Matic (3 - 12 mm)SKU: HK205You can use these cam swivel bases when leads must rotate to face the trimmer. Use them for mainsheets, Jib sheets and control lines. Learn More
-
Double Cam Base - Swivel Base / 412 Cam-Matic (8 - 10 mm)SKU: HK403Ball bearing swivel bases feature dual rows of Delrin® ball bearings that swivel freely even under high loads. Bases include stand-up springs and a U-adaptor to accept a variety of appropriate blocks. Learn More
-
Swivel Fairlead, Cleat, 3-12mm Rope RF58SKU: RF58Dead eyes contain stainless steel liners for low friction and long life. Cleating plates are heavy gauge alloy for stiffness and minimum distortion under load. Learn More
-
Standard Carbo-Cam® Kit - Wire FairleadSKU: HK326Wire fairleads maintain a low profile while holding the line close to the cleat.
Kit includes lightweight, fiber-reinforced 326 Carbo Cam and 298 wire fairlead. Learn More -
XT / XTS / XC / XCS lift-up Cam 12-14mm Lock OpenSKU: CAM1214LXTS/XCS Cam Module (lock-up Version) for 12-14mm. Learn More
-
XT / XTS / XC / XCS Cam 8-14mmSKU: CAM0814Replacement CAM for XT,XTS, XC and XCS powerclutches Learn More
-
XT / XTS / XC / XCS lift-up Cam 8-12mmSKU: CAM0812LUse to convert XTS or XCS to lock open Learn More
-
XT / XTS / XC / XCS Cam 6-10mmSKU: CAM0610Replacement CAM for XTS, XCS, XT and XC powerclutches Learn More
-
Bullseye swivel base / 150 Cam-Matic (3 - 12 mm)SKU: hk240The HK240 and HK241 are simple swivel bases for main and jib sheets on very small boats or for control lines on boats of all sizes. Learn More
-
Bullseye swivel base / 365 Carbo-Cam (3 - 10 mm)SKU: HK241The HK240 and HK241 are simple swivel bases for main and jib sheets on very small boats or for control lines on boats of all sizes. Learn More
-
XTS side mount (set)SKU: XTSSMNTSpinlock has a wide range of kits for all kinds of jammers and clutches. See our range of kits we have available for XT / XTS / XC and XCS. Learn More
-
XAS side mount setSKU: XASSMNTSpinlock has a wide range of spare part kits for all kinds of jammers and clutches. See our range of kits we have available for XA and XAS. Learn More