Hardware

Check out our sailing hardware of brands like Harken, Ronstan, Tylaska, Spinlock, Wichard and Selden. We sell the whole range of blocks, clutches, cleats, furling systems, fittings, deck organizers and winches you may need for your sailing boat. Did you not find the product you were looking for? Just contact us.
Shop By
-
Low Friction RingsSKU: PRH130Low Friction rings are simple aluminum rings which can be spliced into lines. They are used to deflect sheets and control lines or for lashings. They are made of high strength aluminum. Available in 6 different sizes. Learn More
-
Shockcord ClampSKU: PRH778Stainless steel clamps used for joining ends of shockcord. Use our special clamp plier for attaching these. Learn More
-
Halyard Ball StopperSKU: PRH781This halyard ball stopper is to protect your eye-splice, masthead exit and shackle chafing against each other. Available in 4 different sizes but easily drilled out for a snug fit. Learn More
-
XTX Soft Grip 12mmSKU: XTX12The XTX12 handles 12 mm ropes and loads up to 1200 kg with ease. Built for strength and reliability, it combines a small footprint with advanced SOFTGRIP technology for long-lasting rope care and efficient handling. Learn More
-
XTX Soft Grip 10mmSKU: XTX10The XTX10 is optimized for 10 mm ropes and mid-loads up to 1000 kg. Its compact design and retracting toggle provide fingertip control, ensuring durability and performance for boats up to 40 ft. Learn More
-
XTX Soft Grip 8mmSKU: XTX08The XTX08 is an ultra-lightweight clutch designed for 8 mm ropes, holding loads up to 800 kg. Its innovative SOFTGRIP braid ensures a secure grip while protecting rope covers, making it ideal for mid-load applications on smaller boats. Learn More
-
Dogbones Stainless Steel AISI 316SKU: PRH771Dogbones are one of the easiest ways to connect your tack lines, halyards, spinnaker sheets and other trim lines to your hardware of sails. These Dogbones are lightweight, strong and easy to use. Available in stainless steel and aluminium. Learn More
-
D-ShackleSKU: PRH101Stainless steel D Shackle, made out of marine grade 316 stainless steel. Learn More
-
Vang Purchase System 4:1 for cruising yachts (35 - 42ft)SKU: PRH88921Ready to use kit with spliced vang sheet from Cruiser XTS and Seldén fiddle blocks with cleat to from a 4:1 purchase system. To be connected to boom and mast base for best control of your vang with increased pulling power. Suits Rodkickers #10 and #20. Learn More
-
Vang Purchase System 4:1 for cruising yachts (25 - 35ft)SKU: PRH88920Set of Cruiser XTS rope spliced to Seldén fiddle blocks and cleat for a complete 4:1 purchase system ready to use. Just mount it between mast base and boom to control the vang with four times your power. Suits Seldén Rodkicker #5 and #10. Learn More
-
Single XTS Clutch 8-14mmSKU: XTS08141Spinlock - XTS clutch. Suitable for lines between 8-14 mm and has a safe working load of 1000 kg, much stronger then the XAS Powerclutch. The XTS is the standard on production yachts world wide and the choice of offshore and inshore racing yachts. Available in 5 different sizes and option to mount on port of starboard side. Learn More
-
-
Bow ShackleSKU: PRH106Stainless steel Bow Shackle, made out of marine grade 316 stainless steel. Learn More
-
Clamcleat with Wheel 3-6mmSKU: CL236The roller fairlead allows ropes to enter the cleat from above. Ideal for sun umbrellas, shades & sun sails. Also dinghy control lines. Learn More
-
Clamcleat Open 6-12mm blackSKU: CL201A simple cost effective cleat for locking lines at any position Learn More
-
Clamcleat Open 3-6mmSKU: CL203One of the most popular cleats. The Clamcleat® CL203 has many uses on sailing dinghies, kayaks, canoes and industrial applications. Learn More
-
Clamcleat Open 3-6mmSKU: CL204Clamcleat® CL204 is an elegant design in black or white nylon. The rope drops down into the teeth. It can be fitted to all flat and curved surfaces, using rivets, countersunk (flathead) screws or bolts. CL204 can also be sewn, riveted or bolted onto webbing or fabric. Learn More
-
Clamcleat Open 4-8mm blackSKU: CL209With the CL209 the rope drops down into the teeth to give a quick and positive lock that is easy to release. The cleat is manufactured from UV resistant plastic, making it cost effective and ideal for holding rope in an outdoor environment. Learn More
-
Clamcleat with Fair Lead 3-6mmSKU: CL211MK1The Clamcleat® CL211 Mk1 Racing Junior is a very strong alloy cleat. The fairlead guides the rope into the teeth. Learn More