Rigging
The Premiumropes rigging team has extensive experience in yacht rigging. We make rigging to your specifications in our own workshop in Amsterdam. Our riggers also travel around the world to work on site. Please contact us to discuss the best option for your sailing yacht.
We advise to replace yacht rigging at least every 15 years. Make sure to inspect the rigging every year thoroughly to be ahead of bigger problems. Yacht managers of super yachts can best contact us directly for a project quote. Read here more about our mega yacht refit projects.
The Premiumropes team is looking forward to work on your yacht!
-
Ball Terminal for MastlockSKU: PRH451The Ball terminal is used in combination with a mastlock halyard system. Learn More
-
Stainless Steel Wire Rope ThimbleSKU: PRH401Stainless steel eye, made out of marine grade 316 stainless steel. Available in different sizes. Learn More
-
Code Zero Tack LockerSKU: PRH791The ultimate connector between your furler and your anti-torsion ropes. Fits all furler brands. Learn More
-
Nicopress Oval Press SleeveSKU: PRH411Nicopress Oval press sleeves are efficient terminating products and when properly applied provide a secure connection equal to the rated breaking strength of the wire rope. Learn More
-
Self-Amalgamating TapeSKU: PRH49919BK
A non-adhesive tape which bonds to itself and not your fittings. Ideal for rigging screws, terminals, on deck electrics and emergency hose repairs.
19mm wide - 5m long
Color is black
Learn More -
Wire Rope 1x19 Stainless Steel AISI 316SKU: PRW100Most commonly used wire rope for yacht rigging. Wire rope with a high breaking load. Is generally used for shrouds, stays or guard rails. Also used for other applications. Learn More
-
Bench Swager 1.5-5mmSKU: LC1BSCEye, lap and stop sleeve splicing of cables up to 3/16" diameter are made sure and easy with the new hand swagers. Learn More
-
Hand Swager 1.5-5mmSKU: LC1SCEye, lap and stop sleeve splicing of cables are made sure and easy with the new handswagers. Learn More
-
Cable cutter Hydraulic max 16mmSKU: LCHC16Portable , lightweight, and made to last years under the toughest field conditions. Learn More
-
Tension Gauges professionalSKU: LCPT
For 2,5mm - 10mm shrouds - Most Popular model
Use a Loos Tension Gauges to setup your rig with the right tension and repeat the right settings of your standard rigging every time again.
Learn More -
Rod Rigging GaugeSKU: LCRTWe offer a series of gauges to measure the tension in rods from .172 to .375 inch in diameter over a range of approximately 5% to 25% of the breaking strength of the rod and provide an accuracy of + or - 5%. Learn More
-
Tension Gauges standardSKU: LC9The Loos economy tension gauge takes the guesswork out of cable tension adjustment. Learn More
-
Wire cutter W18SKU: PRH82802The D-SPLICER W18 wire cutter easily cuts throught wire rope up to 5mm. Learn More
-
Guard Rail Single EyeSKU: PRH435Eye for short stud used for guard rail fixation. Fixation is done with a rope lash. The benefit of this construction is that it can be cut in case of an emergency. Learn More
-
Swage Eye TerminalSKU: PRH422Eye terminals are engraved with the wire size and swage depth, making them easier to work with and to press or swage onto the wire. Eyes are mainly used as an attachment to rigging screws or forks. Learn More
-
Swage Welded Fork TerminalSKU: PRH421Fork terminals are amongst the most commonly used wire end fittings, they are normally attached to pre drilled anchor plates or steel constructions. Also used in combination with toggles, eyes or U-bolts. Learn More
-
Swage Stud Terminal Right MetricalSKU: PRH420Threaded terminal with metric righthand thread including locking nut. Learn More
-