Rigging
The Premiumropes rigging team has extensive experience in yacht rigging. We make rigging to your specifications in our own workshop in Amsterdam. Our riggers also travel around the world to work on site. Please contact us to discuss the best option for your sailing yacht.
We advise to replace yacht rigging at least every 15 years. Make sure to inspect the rigging every year thoroughly to be ahead of bigger problems. Yacht managers of super yachts can best contact us directly for a project quote. Read here more about our mega yacht refit projects.
The Premiumropes team is looking forward to work on your yacht!
-
Swage Stemball TerminalSKU: SE3085Seldén Stemball Terminal Stainless Steel AISI 316, used in combination with Seldén spreader fittings. Do not use in combination with other brands. Learn More
-
Swage T-TerminalSKU: SE3083Seldén T-Terminals also known as "hook terminals" are used in combination with Seldén backing plates for Seldén masts. Learn More
-
Rigging screw oilSKU: SE312502For cleaning and greasing turnbuckles. All rigging screws should be lubricated every year. Learn More
-
Cup for Stemball TerminalSKU: SE3065Seldén Stemball Cups Stainless Steel AISI 316, used in combination with Seldén Stemball terminals Learn More
-
Bench Swager 1.5-5mmSKU: LC1BSCEye, lap and stop sleeve splicing of cables up to 3/16" diameter are made sure and easy with the new hand swagers. Learn More
-
Hand Swager 1.5-5mmSKU: LC1SCEye, lap and stop sleeve splicing of cables are made sure and easy with the new handswagers. Learn More
-
Cable cutter Hydraulic max 16mmSKU: LCHC16Portable , lightweight, and made to last years under the toughest field conditions. Learn More
-
Tension Gauges professionalSKU: LCPT
For 2,5mm - 10mm shrouds - Most Popular model
Use a Loos Tension Gauges to setup your rig with the right tension and repeat the right settings of your standard rigging every time again.
Learn More -
Rod Rigging GaugeSKU: LCRTWe offer a series of gauges to measure the tension in rods from .172 to .375 inch in diameter over a range of approximately 5% to 25% of the breaking strength of the rod and provide an accuracy of + or - 5%. Learn More
-
Tension Gauges standardSKU: LC9The Loos economy tension gauge takes the guesswork out of cable tension adjustment. Learn More
-
Swageless Eye TerminalSKU: ST033Sta-Lok Self Fit Terminal, the reusable alternative to swage. Easy to install. Only basic hand tools required. No pre measurement needed. Guaranteed stronger than wire rope. Learn More
-
WINDEX wind direction indicatorSKU: WD681100WINDEX is the perfect choice for all sizes family and racing boats. The WINDEX Wind Indicator offers exceptionally good performance. The secret is the needle that rests in a safari layer, which means that Windex finds the shifts even in extremely weak winds. Learn More
-
Swageless Fork TerminalSKU: ST034Sta-Lok Self Fit Terminal, the reusable alternative to swage. Easy to install. Only basic hand tools required. No pre measurement needed. Guaranteed stronger than wire rope. Learn More
-
Swageless Toggle Fork TerminalSKU: ST050Sta-Lok Self Fit Terminal, the reusable alternative to swage. Quick and easy to install. Only basic hand tools required. No pre measurement required. Guaranteed stronger than wire rope. Learn More
-
Wedge for 1x19 WireSKU: ST126Recommended where Sta-Lok terminals are being reused. The 1 x 19 wedge can be fitted on site using very simple hand tools. Learn More
-
Wedge for 7x7 and 7x19 WireSKU: ST127Recommended where Sta-Lok terminals are being re-used. The replacement wedge can be fitted on site using very simple hand tools.For use with 7 x 7 and 7 x 19 wire construction. Wire sizes 3 – 16 mm. Learn More
-
Wedge for 1x19 Compacted Strand WireSKU: ST154Recommended where Sta-Lok terminals are being reused. The replacement wedge can be fitted on site using very simple hand tools. Learn More